View previous topic :: View next topic |
Author |
Message |
ekwatts A series of tubes

Joined: 18 Apr 2006 Posts: 23078 Location: Bongchester
|
Posted: Sun Aug 10, 2014 8:20 pm Post subject: Making a pickup mount using nothing but my bare hands |
|
|
And a motorised plotter designed for scrapbooking (I'm not even really sure what scrapbooking really is) and fabric patterns to cut a design out of plasticard.
Here's the machine:
Basically it's a motorised scalpel that cuts patterns designed on a vector graphics program. Pretty nifty and useful for all sorts of things. Now, in this case, it only really cuts materials up to 1mm or so. For this I'm using 0.5mm plasticard in black. I didn't really need to do this, but the surround I'd previously cut out freehand (which was much harder than it felt like it should have been) was in white PVC foam which I then spraypainted black. It was only ever meant to be a temporary measure but the paint had rubbed off much faster than I thought it would and then it cracked. Boooo. You can see the thin white prototype below next to the old surround I'm replacing.
So 0.5mm is a bit thin on its own. So what I do is cut several copies of the exact same shape and laminate them together using thin polystyrene cement. As the machine is so accurate they all come out pretty much exactly the same, give or take a few frayed edges.
Now, stupidly, I totally forgot to set it to cut twice in the options, so it only ran over the basic shapes once. With plasticard this can be a bit of a bitch if you haven't put guidelines on the template; plasticard can be scored and snapped easily enough if it's straight geometric shapes but not so easily if you're doing rounded shapes like boobs. It can be risky to bend and snap the inner sections but it all worked out fine. As it happens, I had the machine cut eight copies but I only ended up laminating four together as it had already started to feel quite sturdy after that.
I filed the edges down and then painted the top of it with gloss acrylic. Pointless and it ended up looking like a bag of shit, really. Oh well, doesn't look bad from far away. And it doesn't really matter if the gloss comes off because it's still black underneath. Like your mam.
Ta-da. Turned the flash off because I'm an idiot. _________________
Brandon W wrote: |
you elites. |
|
|
Back to top |
|
 |
theshadowofseattle THE TAMPA BAY HERO

Joined: 20 Apr 2006 Posts: 62579 Location: Skrampa, FL
|
Posted: Sun Aug 10, 2014 8:49 pm Post subject: |
|
|
Diggable. How does it sound? I really like the bridge sondz on the Shad Signature Model Riviera, and I'm surprised and offended that you changed it. _________________
Fakir Mustache wrote: |
Classic Shad Deluxe. |
|
|
Back to top |
|
 |
ekwatts A series of tubes

Joined: 18 Apr 2006 Posts: 23078 Location: Bongchester
|
Posted: Sun Aug 10, 2014 9:10 pm Post subject: |
|
|
theshadowofseattle wrote: |
Diggable. How does it sound? I really like the bridge sondz on the Shad Signature Model Riviera, and I'm surprised and offended that you changed it. |
It's good either way! To be honest, I wasn't sure about sticking the Nashville in the Riviera at first, I just wanted to try it out in something so I made the temporary surround and slapped it in. It's a proper upgrade; when you're running the humbucker alone it sounds great. Kick in the middle P90 with it and it's even better. Stupidly good. _________________
Brandon W wrote: |
you elites. |
|
|
Back to top |
|
 |
cur .


Joined: 18 Jan 2009 Posts: 7295
|
Posted: Mon Aug 11, 2014 4:34 am Post subject: |
|
|
This is totally cool, but not as cool as the shortscale scrapbook you are working on. I'm in for a scrapbook if they are not over 20 bucks. _________________
|
|
Back to top |
|
 |
ekwatts A series of tubes

Joined: 18 Apr 2006 Posts: 23078 Location: Bongchester
|
Posted: Mon Aug 11, 2014 7:59 am Post subject: |
|
|
It's going to literally be made out of scrap. Like, wing mirrors and old chrome toasters. _________________
Brandon W wrote: |
you elites. |
|
|
Back to top |
|
 |
benecol Best Poster 2010

Joined: 25 Jan 2011 Posts: 7435 Location: Westcountry
|
Posted: Mon Aug 11, 2014 8:48 am Post subject: |
|
|
Good going Watts. We have a lasercutter at work that works in a similar way (files-wise). I got all excited that it'd cut through metal and revolutionise MBM pedal production/artwork, but it doesn't. Cuts perspex etc. fine though, want to try and do some pickguards sometime.
Anyhow: strong work.
 |
|
Back to top |
|
 |
ekwatts A series of tubes

Joined: 18 Apr 2006 Posts: 23078 Location: Bongchester
|
Posted: Mon Aug 11, 2014 10:10 am Post subject: |
|
|
Thanks! Yeah, it's like a laser cutter in many ways, though obviously not quite as good (but, er, also not thousands of pounds!).
One of the things this cutter can do is adhesive vinyl, though, and my pedal-maker friend has asked me if I could do some designs for his range. It's also great for spraypainting templates. I'm currently trying to figure out how to make some custom plates to go on my Little Rock amp and I'm leaning towards perspex/polycarbonate with the design spraypainted onto the front then sealed with gloss acrylic. I had previously tried transparent vinyl with a design laser-printed onto and stuck onto the back of transparent perspex, then backed with (sprayed) white, but I wasn't entirely happy with it. You know the air bubble problem when applying a screen protector? Imagine that but for the entire front of a Marshall head. Not easy. _________________
Brandon W wrote: |
you elites. |
|
|
Back to top |
|
 |
|