www.shortscale.org

Pupuquek · . Joined: 28 Jun 2015 Posts: 10

I have a 74' Gibson SG with a 1 9/16" narrow nut that is perfect for me. Don't like the flat 12" radius though and the neck could a be bit fatter. So it seems a short scale fender would be perfect.

A neck: 1 1/2" ~38mm
B neck: 1 5/8" ~41.3mm

B width is too thick for me, and A neck i'm not too sure if its too narrow and 24" scale is the shortest I'll go.

Any mustangs, jaguars I can look for?

George · . Joined: 03 Jul 2009 Posts: 20945 Location: UK

pretty sure most current production models have a 42mm nut which is around B width. to get one actually stamped A or B you'd need to go vintage and get the seller to prove it with the stamp or the measurement.

worth trying before you buy though. in my experience it needs to be somewhat of a balance between scale nut width, radius and profile. you may end up feeling squished

Pupuquek · . Joined: 28 Jun 2015 Posts: 10

Yeah I wish to try a few but not much on the market where I'm at. I use to have a CIJ MG65 and it was very playable, don't recall it being particularly wide (i think it is 41mm, slightly smaller then usual B width which are around 41.3~) but was not as comfortable as my SG's nut. Sold it because I hated the thick, shiny finish all over the guitar including the neck, as with all CIJs.

Is there anything out there fender-esque that is cheap and current production with a 1 9/16" neck or smaller? Would like to pick something up and have a feel for it. Regular 25.5" scale would be cool too, I wonder how a narrow nut jazzmaster would feel like. Probably very good.

Thomas · . Joined: 09 Oct 2008 Posts: 3310 Location: Glasgow, UK

The Fender Jaguars from Japan that got released in the UK around 2006/8 (I can't remember exactly when) had really narrow nuts. At the time they were the only ones you could buy new. The ones I saw/played in store were in Daphne Blue, Olympic White and Seafoam green with matching headstocks and were very narrow across the nut. Very similar to my vintage A width Jaguar. The string spacing may have even been a little closer even.

That's the only very narrow neck I've played (as far as modern necks go). Late 70's Musicmaster necks are on the small side too and meet just about all of your specs. They're also about the cheapest vintage Fender neck you can buy. They are also AMAZING.

dots · Posted: Tue Jul 21, 2015 10:32 pm Post subject:

my 2005 avri jag has a super narrow nut, too. says it's a C neck, but it feels smaller somehow.
_________________
Check out Runway Runaway by Saturday's Child

paul_ · . Joined: 27 Jul 2006 Posts: 9747

I don't advise this often but you clearly want a Jag-Stang neck, which is both A-width and a more similar profile to that titchy Norlin spec than most reissue Jaguar necks I've played. From my experience with similar guitars on topic here, I think you'd find that the most ideal compromise... I have a '72 SG-II and a Jag-Stang, the SG actually feels slightly narrower at the nut to me (even though it apparently isn't) but they are comparable in width/string spacing, and even neck profile right down at the nut... feels like a stick when you're on the cowboy chords.
_________________

singlepup · . Joined: 10 Dec 2010 Posts: 4151 Location: San Diego

I'd second the Jag-Stang. The neck width at the nut is 39.68 mm. It's 24" scale with a 7.25" neck radius. The neck is slightly fat and fits perfectly in your hand.

I own one and it has the most comfortable neck I've ever played. Many here will agree with me.

Late 70's Musicmasters will also work and are a great find. The Jag-Stang is MIJ/CIJ and has that shiny finish you hate. If you really can't convince yourself to go MIJ, you can find a used Musicmaster on Guitar Center's website (of all places) for under $700.

Pupuquek · . Joined: 28 Jun 2015 Posts: 10

I was just looking up the Jag-stang on ebay. Shame about the thick finish. I know I'll never truly bond with that guitar.

By late 70s Musicmasters, does that include the Musicmaster IIs?

Thomas · . Joined: 09 Oct 2008 Posts: 3310 Location: Glasgow, UK

Nah, Musicmaster II was actually earlier. I meant the late 70s ones. You can easily spot them by the 70's style logo and the fact they have the serial # on the headstock decal.

Pupuquek · . Joined: 28 Jun 2015 Posts: 10

Thought i'd ask rather then start another thread:

24" scale A necks with clay dots, do they exist?

Thomas · . Joined: 09 Oct 2008 Posts: 3310 Location: Glasgow, UK

Yup, My Jaguar is a 64, clay dots, A width. Stuart Has a 65 mustang that's A width, I'm not sure if the dots are clay or pearloid.

MatthewK · Posted: Thu Jul 23, 2015 10:31 am Post subject:

Aren't clay dot Mustangs considered mythical?
Oh and my avatar is the headstock of a late 70s Musicmaster. Which is fantastic.

Thomas · . Joined: 09 Oct 2008 Posts: 3310 Location: Glasgow, UK

I wouldn't be surprised if some left over Jaguar necks became Mustangs. There's a little bit of cross over time wise so I wouldn't be shocked if there were some.