ShortScale Forum Index
www.shortscale.org
Head 'n Neck Above
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
UploaderUploader  

Replacement tuners for Fender CP Jaguar HH

 
Post new topic   Reply to topic    ShortScale Forum Index -> Guitar Projects and Tech/Set-up
View previous topic :: View next topic  
Author Message
Ricey
.
.


Joined: 22 Aug 2016
Posts: 14

PostPosted: Sun Jun 21, 2020 4:21 am    Post subject: Replacement tuners for Fender CP Jaguar HH Reply with quote

I would like to replace the stock "Vintage Style" tuners on my Classic Player Jaguar HH with a set of high-quality direct replacement locking tuners. The stock tuners look identical to the vintage Kluson style tuners found on the American Original series, but I believe the gears are made of plastic instead of metal?

I prefer NOT to do any drilling or routing on my headstock.

I have read that there are sometimes compatibility issues with replacement tuners because of U.S. vs. metric measurements and that sometimes the posts or bushings can be either too big or too small?

I assume the pegholes and bushings are metric sized on a CP Jag?

Any ideas for direct replacement locking tuners?

Any ideas would be greatly appreciated!
Back to top
View user's profile Send private message
paul_
.
.


Joined: 27 Jul 2006
Posts: 9955

PostPosted: Tue Jun 23, 2020 7:20 pm    Post subject: Reply with quote

I believe import Fenders use Ping brand for vintage style tuners and US Fender use Gotoh... this at least was how it was in the '00s, Squier CV may have used Ping as well or something cheaper by now as you can get vintage Kluson ripoffs for peanuts that aren't terrible... so I don't believe there actually is a metric compatibility issue on reissues because the tuners are all Asian now.

I have had a discrepancy with pegs and bushings of a different manufacture, likely because I was putting AllParts vintage repro Kluson-style tuners on a CIJ Jag. The pegs wouldn't quite clear the guitar's stock ferrules and the ones it came with were a very tight fit in the headstock's pegholes. I think with vintage US stuff you'll see the most discrepancy.

Gotoh make a lot of Kluson-style locking tuners to retrofit guitars that had vintage style tuners.
_________________
Aug wrote:
which one of you bastards sent me an ebay question asking if you can get teh kurdtz with that 64 mustang? Mad

robertOG wrote:
fran & paul are some of the original gangstas of the JS days when you'd have to say "phuck"
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    ShortScale Forum Index -> Guitar Projects and Tech/Set-up All times are GMT
Page 1 of 1


Powered by phpBB 2001, 2002 phpBB Group

Anti Bot Question MOD - phpBB MOD against Spam Bots
Blocked registrations / posts: 745422 / 0