ShortScale Forum Index
Head 'n Neck Above
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups      RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
UploaderUploader   ShortScale WikiBuilder

Anyone else own a Danelectro Dano Pro?

Post new topic   Reply to topic    ShortScale Forum Index -> All Other Guitars
View previous topic :: View next topic  
Author Message

Joined: 05 Aug 2008
Posts: 49
Location: Seoul

PostPosted: Mon Aug 18, 2008 10:31 am    Post subject: Anyone else own a Danelectro Dano Pro? Reply with quote

I got this a couple of months ago and I really like it.
The neck pickup has a fantastic sound - really smoking. A lot of the info I've read about the 07 reissue of the Pro says the pickups are wound hotter than the models produced a few years ago.
I've been banging on guitars off and on for a long time but have just recently taken an active interest in the technical side. I'm a n00b, but I know my ears. When I switch from the Jag to the Dano Pro, with the same settings on the amp, it's easy to hear that the pickups have more oomph in them. Although it could be the semi-hollowness of the Pro also.

Also, I like the shorter neck. My arms are not short, but playing just feels more comfortable.
Maybe it's got something to do with the way the neck is bolted on, but it has heaps of sustain. (See benecol's thread because the way the necks are attached is the same. In fact, when I have it strapped on and body is sitting against my kidneys in a particular way, I can feel the sound resonate which is pretty cool.

It handles distorted tones better than I thought it would. I thought it would mostly be in the realm of clean and slightly overdriven sounds but it goes well even with the Big Muff.

One of the things that's not so great (and benecol mentioned this too) is that the tone & vol knobs don't taper much at all.
I didn't want to cross-post, but this is one project I was thinking of. I haven't tried my hand at soldering yet, but was thinking about getting a couple of tone/vol of from somewhere like and replacing the stock ones. That wouldn't be too hard would it? Would it? (I don't want to fuck up my guitar!)

I was initially thinking that the bridge pickup wasn't so great. The sound is definitely a lot thinner than the neck, but I'm starting to think that it's just different. If I attempted to change it, it would probably end up sounding very similar to the neck -- and there's no point in making them sound the same.

But another thing I was thinking of doing was rewiring the middle position of the selector toggle. Right now it has both pickups on. What I'm wondering is if it can be rewired to that the two pickups run together, acting like one spread out humbucker. I read somewhere that kind of thing is possible but I'm wondering how difficult is it -- do you have to mess with the insides of the pickups or is it just the wiring in between?

Anyway, I know this kind of guitar isn't for everyone but I really dig it.[align=center][align=justify][align=left][align=right]
Hi! I'm
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    ShortScale Forum Index -> All Other Guitars All times are GMT
Page 1 of 1

Powered by phpBB 2001, 2002 phpBB Group

Anti Bot Question MOD - phpBB MOD against Spam Bots
Blocked registrations / posts: 677697 / 0

Guitars at Musician's Friend

Help support this site by clicking the above link!