I used the Tiler program suggested earlier with the Jag-stang template. I laid it on top of my Mustang template. Any idea if this looks close? Is a Jag-stang that much thinner than a Mustang in the waist? I matched up the lower horns and the neck pocket.
Joined: 29 Sep 2008 Posts: 971 Location: In the Gateau
Posted: Mon May 30, 2011 8:56 pm Post subject:
Is that area of MDF by the neck pocket just the thickness of the board?
If so, then it looks good.
The bottom half of the Jagstang is different to Mustang.
If you align the Mustang template centreline with the centreline of the Jagstang body, the routes will be bang on.
I believe the centrelines of the Jagstang bridge HB and Mustang singlecoil line up too.
It might be cool to tweak to lower horn and build the body to take a Mustang pickguard.
Would give more options of pickups, pickguard material, colours, etc...
Is that area of MDF by the neck pocket just the thickness of the board?
If so, then it looks good.
The bottom half of the Jagstang is different to Mustang.
If you align the Mustang template centreline with the centreline of the Jagstang body, the routes will be bang on.
I believe the centrelines of the Jagstang bridge HB and Mustang singlecoil line up too.
It might be cool to tweak to lower horn and build the body to take a Mustang pickguard.
Would give more options of pickups, pickguard material, colours, etc...
Yeah, that is the edge thickness. I basically laid the Jag-stang template on top of the Mustang MDF template and that's what you see in the picture. I noticed the Mustange lower horn is slightly different than the Jag-stang (JS cuts deeper into the body). I never thought about making the lower horn match the Mustang to avoid having to buy a Jag-stang pickguard, but it would make it unique. I might have to consider that. I plan to lay my Mustang template on top of it to transfer the neck pocket, pickup routes and bridge routes.
Are there any other dimensions I should check? _________________ J Mascis Jazzmaster | Baja Telecaster
AVRI Jaguar | 1967 Fender Coronado II |1977 Mullet-stang | 1973 Fender Bronco
My first day on vacation I thought I would work on finishing up my templates. I had to fix my Mustang template based on the Mullet-stang Body. I ended up with 4 template sets. A little more work tomorrow and they will be done.
Hidden:
All templates
Mustang
Jazzmaster
Super-sonic
Jag-stang
Joined: 20 Apr 2006 Posts: 13750 Location: South St. Louis
Posted: Sat Nov 05, 2011 6:51 pm Post subject:
Taylor, you seem to have the whole printing process down pretty well. How much would you charge to make some copies of your paper templates and send em to me? There's a few I wanna copy but I need to make a few mods to them before cutting into the MDF. I am afraid of printing these out and fucking it up. _________________
euan wrote:
I'm running in monoscope right now. I can't read multiple dimensions of meta right now
You can print them out on your home computer with regular paper, just tape em together. Or go to FedEx, Kinko, etc... if you want a large print. When you open the file. Click "print" and select "no scale". If you don't hit "no scale" the printer will just print to fit whatever size paper you've selected.
What I'd like to know... what type of software can we use draw up our own guitar bodies. Something where we can drag/click parts and with everything already to scale.
I know for a fact my Jag-stang and Super-sonic prints are off, but I have actual traces for both now. _________________ J Mascis Jazzmaster | Baja Telecaster
AVRI Jaguar | 1967 Fender Coronado II |1977 Mullet-stang | 1973 Fender Bronco
Joined: 20 Apr 2006 Posts: 3105 Location: a series of tubes
Posted: Thu Feb 02, 2012 11:40 pm Post subject:
Are there any of you with a mandocaster (especially neck an pickguard) template? _________________ [quote="jcyphe"] Mo is the most sensible person in this thread.[/quote]
[quote="icey"]and thats for the hatters (╯°□°)╯︵ ┻━┻[/quote]
Are there any of you with a mandocaster (especially neck an pickguard) template?
I do. Well, just about. Cooter has one and I am working on another. I also just acquired a tasty piece of mahogany. It is unlikely that I will ever score a real mahogany Mustang, so I may want to make one using one of these templates. _________________ Yell Like Hell
Joined: 20 Apr 2006 Posts: 3105 Location: a series of tubes
Posted: Mon Mar 05, 2012 5:35 pm Post subject:
I'm just looking for a mandocaster neck and pickguard template for this summer. I've already got the body. I wanna get this done! _________________ [quote="jcyphe"] Mo is the most sensible person in this thread.[/quote]
[quote="icey"]and thats for the hatters (╯°□°)╯︵ ┻━┻[/quote]
Joined: 15 Jan 2008 Posts: 6405 Location: Edmonton Alberta
Posted: Mon Apr 02, 2012 4:40 am Post subject:
well i sifted through all the pages, and noticed two things.
1. the Misc. Pickguards link & the Tele Deluxe Pickguards despite having different file names, and different links, the PDFs contain the same infrmation
2. there is no template for a Cyclone II pickguard, and it saddens me.
well i sifted through all the pages, and noticed two things.
1. the Misc. Pickguards link & the Tele Deluxe Pickguards despite having different file names, and different links, the PDFs contain the same infrmation
2. there is no template for a Cyclone II pickguard, and it saddens me.
I will check on that link.
If you find a Cyclone II template, send it to me and I will post it. _________________ J Mascis Jazzmaster | Baja Telecaster
AVRI Jaguar | 1967 Fender Coronado II |1977 Mullet-stang | 1973 Fender Bronco
Joined: 18 Jan 2007 Posts: 11139 Location: Behind you. Don't turn around
Posted: Sat May 19, 2012 5:30 pm Post subject:
So I finally got around to printing out the Mustang template and was horrified to find that it is shorter than my carefully constructed and hand drawn template that based on my 65 mustang. The pickguard is off as well compared to both a real live vintage guard as well as an AllParts guard (which is spot on with the proper fender one).
It may be based on a Japanese reissue or something. The neck pocket is the only thing correct and the 10mm box is correct so i know it was printed right.
I am currently working on moving the templates from my Mobile Me account (expires on Friday) to a Drop Box Account. The links will be good through Friday and I should have the links move over from DropBox by then.
I will update the original post as well.
First Test link in DropBox seems to be working: 60s Stratocaster _________________ J Mascis Jazzmaster | Baja Telecaster
AVRI Jaguar | 1967 Fender Coronado II |1977 Mullet-stang | 1973 Fender Bronco
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
Uploader
Builder
