ShortScale Forum Index www.shortscale.org
Head 'n Neck Above
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
UploaderUploader   ShortScale WikiBuilder

Simple parallel/series wiring (Mustang)

 
Post new topic   Reply to topic    ShortScale Forum Index -> Guitar Projects and Tech/Set-up
View previous topic :: View next topic  
Author Message
Fakir Mustache
.
.


Joined: 25 Sep 2013
Posts: 3279

PostPosted: Fri Feb 14, 2014 12:02 pm    Post subject: Simple parallel/series wiring (Mustang) Reply with quote

I looked on the internet, and I haven't seen anyone else post this, although I've seen other more complicated wiring schemes. This one is so simple, someone else may have figured it out too.

This is standard Mustang wiring, view from under the pickguard, neck at left, bridge at right. The connections we will be modifying are highlighted in purple.


This is what we want to get to, the red and green wires are the new connections.

It is not necessary to completely disconnect the "purple" wires from the first drawing. In fact, much easier is to simply desolder the wires in two of the points (3 connections total to be desoldered). When putting it back together, in one case you can simply solder two of the short wires together and cover with electrical tape (which is actually what I had done), for the remaining wire you can solder a small wire (it needs to be longer) and cover it with tape as before.

The way this works is:
Switches towards the bridge work as normal (on for each pickup)
Switches work normal in the middle (off for each pickup)
You have to have both switches towards the neck to activate series mode. Just one switch towards the neck doesn't do anything.
You don't get an out of phase option anymore.

You should be able to mirror the diagram and have the series switches towards the bridge and the parallel towards the neck if you want. It has occurred to me that in fact the sound is not the same on a stock Mustang in the two outer positions, even on one pickup by itself (or both in phase), really, try it if you don't believe me. So according to this you may choose to keep one side or the other for the stock parallel connection.

Anyways, I wired my Mustang back to stock, but here is a video of the mod:

Link
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    ShortScale Forum Index -> Guitar Projects and Tech/Set-up All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2001, 2002 phpBB Group

Anti Bot Question MOD - phpBB MOD against Spam Bots
Blocked registrations / posts: 616232 / 0

Guitars at Musician's Friend

Help support this site by clicking the above link!