www.shortscale.org

Awstin · . Joined: 14 Jan 2012 Posts: 3933 Location: Pennsylvania

Stupid warmoth can't make the neck I want in 7.25 radius. But my bridge is 7.25 radius and I can't change that. How would a 7.25 bridge we on a 9.0 or 9.5 neck? Could I also grind the saddles or shim them? Also... It will be a 12 string.
_________________
Congratulations! Your Punkacc9 evolved into Awstin.
www.facebook.com/thethylacinesband

theshadowofseattle · Posted: Mon Apr 14, 2014 9:11 pm Post subject:

I have that set up on my Shadowmaster. Your E's are elevated moreso than the rest of the strings. Not a big deal.
_________________

othomas2 · . Joined: 20 Apr 2006 Posts: 4026 Location: London

Just put a washer underneath each E saddle... job done. Very Happy

I did that on my low E as I cut a deeper groove into it to prevent slippage... so heightened it for that reason.

I later did on the higher E just to raise it slightly to prevent chocking on bends.

Awstin · . Joined: 14 Jan 2012 Posts: 3933 Location: Pennsylvania

I'll be using the 9.0/9.5 neck with one of these bridges though. I'm just tring to figure out if it would be worth the $100 -$200 more to have matching radius's on a 12 string.

_________________
Congratulations! Your Punkacc9 evolved into Awstin.
www.facebook.com/thethylacinesband

finboy · Posted: Mon Apr 14, 2014 9:48 pm Post subject:

Talk to john at staytrem, he does custom work by request sometimes and might be able to adapt some 9.5 saddles from his bridges

Awstin · . Joined: 14 Jan 2012 Posts: 3933 Location: Pennsylvania

finboy · Posted: Mon Apr 14, 2014 9:53 pm Post subject:

He does awesome work, you might have to send him the saddles to work off of if he can do it

Awstin · . Joined: 14 Jan 2012 Posts: 3933 Location: Pennsylvania

oooooo thats sweet man. I just emailed him!
_________________
Congratulations! Your Punkacc9 evolved into Awstin.
www.facebook.com/thethylacinesband

Awstin · . Joined: 14 Jan 2012 Posts: 3933 Location: Pennsylvania

finboy · Posted: Mon Apr 14, 2014 11:03 pm Post subject:

Not my bridge, but I do intend to get one from him eventually

I'm surprised ma$tery hasn't made one yet for $500

Awstin · . Joined: 14 Jan 2012 Posts: 3933 Location: Pennsylvania

Awstin · . Joined: 14 Jan 2012 Posts: 3933 Location: Pennsylvania

"The saddles are much different to the ones I currently produce and therefore would need special tooling. I am very sorry but it would not be practical for me to make one or even a few sets.

Regards
John"

Damn.
_________________
Congratulations! Your Punkacc9 evolved into Awstin.
www.facebook.com/thethylacinesband

Awstin · . Joined: 14 Jan 2012 Posts: 3933 Location: Pennsylvania

Maybeee if we made a post to see how many people would buy an xii bridge, it would show enough interest and he would make them. I mean who hasn't wanted an xii bridge?
_________________
Congratulations! Your Punkacc9 evolved into Awstin.
www.facebook.com/thethylacinesband

jagsonic · . Joined: 28 Dec 2009 Posts: 757 Location: Germany

Fakir Mustache · . Joined: 25 Sep 2013 Posts: 3141

I don't know if this will help you any, but on my Squier I put a regular Mustang bridge but instead of the low E saddle I used an A or B saddle from another set. No problem with the high E and it plays fine like this.
_________________

Awstin · . Joined: 14 Jan 2012 Posts: 3933 Location: Pennsylvania

Fakir Mustache · . Joined: 25 Sep 2013 Posts: 3141

It might if you can get hold of two more saddles. Not 100% sure, but it might.
_________________