www.shortscale.org

[Golden_Sonic]

I still want to swap my Squier-Stang bridge so I've checked Staytrem bridge: WOW! What a dumbass I would be! So I should buy a bridge that costs half the price I paid for my used guitar, isn't it? (65£=90€, I paid 190€ my Mustang). So I checked Ebay and (WHAT A SURPRISE!) I've found THIS at half the price of the Staytrem.
I sent a mail to the seller and asked if it is a real 9,5" radius bridge for Mustang (the same radius of the Squier-Stang bridge). He replied me with this:

"This bridge is generic distributed par Japanese firm HOSCO. Many people (it is one of my leading product) use it to convert the Threaded saddle of their original Fender jaguar-jazzmaster into this ones
http://www.jag-stang.com/guitars/jaguar/fender-jaguar-jazzmaster-bridge-mod/
The 9.5" radius has been measured on saddles by myself"

So I've done a research for this japanese HOSCO brand and I have found only [url=http://onedrive.live.com/view.aspx?resid=D610432B9DACA003!127&ithint=file%2cpdf&app=WordPdf&authkey=!ANNPdlZoU7E8nug]THIS[/url]. So that bridge is supposed to be a part of the whole Mustang bridge kit. Can you give me any advice about what should I do? Paying 90€ for a staytrem bridge is a PITA but I want to be sure with this one. There are some measures on the Ebay page of the bridge and I can't control for myself now if they are the same of the Squier-Stang bridge.
_________________
-Guitar: Squier VM Mustang, Squier CV '50 Duo Sonic;
-Amplifier: Hughes&Kettner Blue Edition 60;
-FXs: Dunlop Cry Baby GCB-95 Wah, Boss BD-2 Blues Drive, Proco RAT, Danelectro Cool Cat Tremolo, EH Small Clone, MUZA FD900, Bespeco Volume pedal.

[MatthewK]

What's wrong with the Squier bridge?

[Golden_Sonic]

The strings rattle and buzz on the stock bridge; I've tried to flip it (as suggested by Fakir) but the intonation is completely out after the 13th fret now
_________________
-Guitar: Squier VM Mustang, Squier CV '50 Duo Sonic;
-Amplifier: Hughes&Kettner Blue Edition 60;
-FXs: Dunlop Cry Baby GCB-95 Wah, Boss BD-2 Blues Drive, Proco RAT, Danelectro Cool Cat Tremolo, EH Small Clone, MUZA FD900, Bespeco Volume pedal.

[Fakir Mustache]

The problem is I've never heard of a Japanese bridge with anything other than 7,5" radius.
_________________

[Golden_Sonic]

[Fakir Mustache]

You can look on Fender Japan and every guitar they make has a 7 1/2" radius. I think the way he wrote it he could say it's the diameter of the cup ridge in mm. Or the bridge rim (not the saddles).

What I did though, I took the A saddle from another Japanese bridge and put it on the low E, works better on the Squier.

The standard bridge seems to buzz on the low E even on my USA, so it's probably not the best design even with the correct radius, and I have it slightly higher on the bass side as well.
_________________

[Noirie.]

With a Mustang bridge, If you place one small washer underneath both E string saddles. It should balance it out a bit better.

[Thomas]

[MatthewK]

As a start, I would try taking the bridge off the guitar, warming it for a while using a hair dryer, dripping some melted wax into the saddle screws, then using the hair dryer to melt the wax away so it's nearly all gone. The thin layer between the screws and the saddles should silence any rattling. Make sure the tops of the saddles are clean so you don't get wax touching the strings.

[singlepup]

[Golden_Sonic]

[NickS]

Use as a shim.

[BearBoy]

Going back to your original post, I don't think spending £65 on a Staytrem bridge would make you a "dumbass". Sure, they're not super cheap, but they are excellent bridges and better than any other Jag/Jazzmaster/Mustang bridges I've tried (I haven't tried a Mastery but suspect you wouldn't want to spend that much).

You'll get the right radius and a bridge that, from my experience at least, is solid as fuck without needing any dicking about with wax, loctite, washers etc.
_________________

[MatthewK]

Half the cost of the guitar on a bridge? Personally I would give 50 cents worth of wax a try, but maybe I'm crazy.

[singlepup]