View previous topic :: View next topic |
Author |
Message |
ekwatts A series of tubes

Joined: 18 Apr 2006 Posts: 23185 Location: Bongchester
|
Posted: Tue May 31, 2016 10:01 pm Post subject: Jaguar-appropriate nut |
|
|
What kinda nut fits a Jaguar? _________________
Brandon W wrote: |
you elites. |
|
|
Back to top |
|
 |
paul_ .


Joined: 27 Jul 2006 Posts: 9753
|
Posted: Wed Jun 01, 2016 5:32 pm Post subject: |
|
|
Depends which Jaguar it is but most are B-width which is 1 5/8" or 41ish mm. If it has a 7.25" radius the bottom (and top) of the nut has to have a matching curve, whereas modern/CP/Squier style nuts are flat on the bottom and 9.5" on top.
You should measure your guitar but bottom line is its either going to be a "41mm" (1 5/8") or "43mm" (1 11/16") Fender nut, vintage reissue if it's a AV/Japanese one o'thems and modern style if it's anything else. _________________
Aug wrote: |
which one of you bastards sent me an ebay question asking if you can get teh kurdtz with that 64 mustang?  |
robertOG wrote: |
fran & paul are some of the original gangstas of the JS days when you'd have to say "phuck" |
|
|
Back to top |
|
 |
Mo Law-ka strictly roots
Joined: 20 Apr 2006 Posts: 3105 Location: a series of tubes
|
Posted: Thu Jun 02, 2016 1:37 am Post subject: |
|
|
paul_ wrote: |
Depends which Jaguar it is but most are B-width which is 1 5/8" or 41ish mm. If it has a 7.25" radius the bottom (and top) of the nut has to have a matching curve, whereas modern/CP/Squier style nuts are flat on the bottom and 9.5" on top.
You should measure your guitar but bottom line is its either going to be a "41mm" (1 5/8") or "43mm" (1 11/16") Fender nut, vintage reissue if it's a AV/Japanese one o'thems and modern style if it's anything else. |
Apparently DEEZ NUTS (but I'm sure you saw them coming from a mile away) _________________ [quote="jcyphe"] Mo is the most sensible person in this thread.[/quote]
[quote="icey"]and thats for the hatters (╯°□°)╯︵ ┻━┻[/quote] |
|
Back to top |
|
 |
ekwatts A series of tubes

Joined: 18 Apr 2006 Posts: 23185 Location: Bongchester
|
Posted: Thu Jun 02, 2016 1:39 pm Post subject: |
|
|
Japanese, Made in Japan I believe, rather than Crafted, if that makes a difference. It might even be the other way round because I'm sat in work and don't pay attention to this shiiiiiiiiit. _________________
Brandon W wrote: |
you elites. |
|
|
Back to top |
|
 |
paul_ .


Joined: 27 Jul 2006 Posts: 9753
|
Posted: Sat Jun 04, 2016 7:26 pm Post subject: |
|
|
Shouldn't make a difference. If it's a 62RI it'll take the curved bottom 1 5/8" nut... I don't know about the HH's necks, they're probably modern. _________________
Aug wrote: |
which one of you bastards sent me an ebay question asking if you can get teh kurdtz with that 64 mustang?  |
robertOG wrote: |
fran & paul are some of the original gangstas of the JS days when you'd have to say "phuck" |
|
|
Back to top |
|
 |
|