Joined: 18 Jun 2007 Posts: 130 Location: Chicago Burbs, IL
Posted: Mon Nov 07, 2016 7:52 pm Post subject:
BTW, the online service from Kenny's was impeccable, with a certain Danny really giving me the quickest responses of any online retailer I've dealt with, pretty much all hours of the day.
I agree!!! I just bought one last week myself.
First I tried Thomann because international shipping to the US was cheaper, and it was a disaster. Their web site was wrong about stock being available, and it took a week of back and forth to confirm and cancel.
Then I ordered from Kenny's and had the opposite experience. I can't believe how great and responsive their customer service was to someone across the pond at an ungodly local hour.
The TOMtrem is the best feature about my Jazzmaster, so I for one will be curious to see how it all works (As others have noted, Squier nuts aren't exactly crafted -n-hand-buffed wonders), but figure I can also throw on a Mustang bridge lying here around if needed. And half-degree neck shim. And probably a few other useless things
Off the bat I'll agree that it's an overall design just different enough to be quite unique, and I really hope something like this gets the mass-produced treatment. As hinted, had a great time chatting with singlepup over bowls of pho, and was happy to bring dat Jarman along. True fact, I was born just 5 minutes from the very place in old town San Gabriel...
All in all, mine kinda needs/needed work, though a little heavy manners seemed to knock some loose bits up back into shape. Some comments:
1. Screw-in trembar is a lovely thing, and although I don't mind Jag/Jazz reverb handles resting just fine on the input jack output jack and giving it a grab when needed, just enough tension while screwing it in is a nice plus, added to the fact that the handle sits higher (common on normal VM Jazzmasters I've played as well). However, mine came with a tremolo base(socket?) set so far off to the treble side that it scraped and caused the strings to stick. Some heavy wiggling a la Swervedriver took care of things alright after a few minutes of hearty abuse enough to not cause it to stick anymore, and since I've never disassembled a standard Fender-stamped ass'y to see if it's a matter of adjusting, I've just let it be for now and won't bother trying to do anything more. Dust galore, and I angled things just right to line up with the taegeukki on the ceiling of my old bedroom...with shaft still rubbing slightly against the hole
2. TOM saddles had some lateral play in them and would loudly creak when I bent notes. At first I thought it was the nut (as Pat mentioned it's another shoddy job, to be sure), but then found myself able to move the A and D saddles with my fingers and had to give things a twist. Seem to be fine now, and the TOM with proper radius (YAY +bazillion!) works just as well as the venerable 3TS Jazzmaster with zero string jumping and a world of sustain, even with very light original strings...so much so that I'll likely string it up with 10s and wouldn't dream of a shim or buzzstop at this rate.
3. Neck is absolutely wonderful. A wee bit more front to back than the Jag, also being a slightly rounder C than my CIJ Jazzmasters.
4. Haven't messed about with the actual tones thru a proper amp, but so far with the Roland Cube at the SoCal house it was very well balanced and dare I say "tastefully weak" (especially the humbucker, even as it nearly kissed the strings out of the box), which in my book isn't such a bad thing if the upper end timbre makes up for the lack of oomph and sends you into teh janglezonez, which the out of phase switching is already doing a surprisingly decent job. Still, the TV Jones Magnatron I still have should be a great bridge chimer for what I have in mind, and my brain is telling me that an SD Duckbucker should accordingly be a good compliment in the neck, if I go that way. Will see, it's sitting disassembled on the guestroom bed at the Seoul house now after a ride in my suitcase across the Pacific.
Last edited by ultratwin on Mon Nov 28, 2016 4:40 am; edited 1 time in total
For what it's worth, my Musuar just made its debut at CES 2017.... On the main riff, I used the Zoom G3's OC2 mod to do a single octave below, followed by a Rat-style dist. Double tracked nice and icky sounding with more icky double stops for fun, the client chose this track over two more traditional Samsung Hans Zimmeresque tracks I had prepared and synced to the video. Played bass direct and used the Waves CLA plugin for brickwall compression and heaps of grit. Layered the snare with artillery shots for more silly fun.
The Jarman is kinda buried in the mix with the Samsung Odyssey gaming laptop launch that comes out later (go to 1:19:35), which instead used Spectrasonics Omnisphere and Trillian to bring on the brootalz. No lie, the roar when the "dragon eye" comes on at 1:19:40 is actually a bobcat and alligator layered plus gobs of delay. It was the best I could do when staff talked of "finding a dragon to growl for us"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum