Posted: Sun Jul 08, 2018 10:29 pm Post subject: Teardrop content - Wiring diagram help
Hello everyone. My name is Eric and I am building a teardrop guitar.
So I finished the scratchplate that will hold the electrics. Hooray! This project was started in 2010. Anyway, I have mounted two humbuckers and have three B500k pots, 2 on/off switches and a jack socket. What I need is some kind of diagram as to how to wire the pickups in the following setup:
2xVol, 1xTone, an on/off switch per pickup.
My wiring knowledge is laughably shit so I can't quite figure out how to do it. Halp me. _________________
Brandon W wrote:
you elites.
Last edited by ekwatts on Tue Jul 10, 2018 9:20 am; edited 1 time in total
Thanks chaps. Just about to drill out the holes for the electronics tonight. The second scratchplate section is mostly done now, just need to mount it.
That SG guitar looks great, what is it? I was thinking of doing a floating Les Paul style pickguard section for the teardrop but decided to just go with a flat-mounted piece again.
Last bits to do now are a piece for the truss rod adjustment cover on the headstock.
Simpsons Scrabble Realtalk:
Hidden:
Hahaha, it's great! It comes with a two-sided board and a deck of cards. One side of the board is standard scrabble and the other is all over the place with x5 score boxes and stuff. The cards are horribly unbalanced and can kick you into the lead by a hundred points over something stupid.
You're also allowed to play any word related to the Simpsons, and they get more points. Like KWYJIBO.
Did you get someone from the US to send you that Guitar Fetish stuff? Their shipping charges seem ridiculous, more than the items themselves. _________________
It's only the trem from GFS. I picked it up in a sale so it ended up costing less than the original price even with the shipping heaped on. So it wasn't too bad.
The bridge is just a cheapo "Rickenbacker" style bridge from a cheap parts supplier on eBay.
The pickups are Entwistle pickups, they're called Nashvilles, basically just PAF-styles in a faux-filtertron minihum casing. I've stuck them in nearly all my humbucker equivalent guitars at this point. I love em. _________________
No wiring yet, because I just realised that I still need to try and sort the grounding out. The bridge sits on a metal plate that is secured with two regular scratchplate screws, so there's no hardware that really goes into the body, so I suspect I'll need to get creative... I was thinking of drilling a small hole that pops up underneath the bridge plate so the ground wire can just rest underneath it, secured once the plate is screwed down fully.
Anyway, hopefully I'll this all soldered up by next weekend.
(low quality instagram picture stolen from Jasmine) _________________
Joined: 30 Nov 2006 Posts: 1182 Location: Blue Ridge, GA
Posted: Sat Jul 14, 2018 11:03 pm Post subject:
ekwatts wrote:
So I drilled the holes, installed the bits....
No wiring yet, because I just realised that I still need to try and sort the grounding out. The bridge sits on a metal plate that is secured with two regular scratchplate screws, so there's no hardware that really goes into the body, so I suspect I'll need to get creative... I was thinking of drilling a small hole that pops up underneath the bridge plate so the ground wire can just rest underneath it, secured once the plate is screwed down fully.
Anyway, hopefully I'll this all soldered up by next weekend.
(low quality instagram picture stolen from Jasmine)
Yep, that's how I did it on my Harmony Bobkat. I have the same bridge you have on yours. _________________ Smells like Rock n' Roll
Pulled an all-nighter wiring it up the way I thought would work. Plugged it in, aaaaaand.....
Nothing.
I'd started with one pickup switch set to off, one set to on, both volumes and tone rolled up.
It was only when I switched both positions to "off" that I got any sound. Only the bridge appeared to be coming through; Both switches had to be flicked down, while both volumes worked for that one pickup. The tone did nothing at all.
Sooooo, shit.
Guess next time I'll just use an actual schematic instead of trying to be clever and winging it (which, to be fair, I did the first and only time I ever wired a guitar from scratch and it worked perfectly so FFFFUUUUCCCKKK IIIITTTTT).
I'll probably go with 1xVol, 2xTone, 1x3-way switch and a coil tap switch (so I can still use the holes I already drilled) when I attempt it again. _________________
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum