ShortScale Forum Index www.shortscale.org
Head 'n Neck Above
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
UploaderUploader   ShortScale WikiBuilder

Another musicmaster bass build (now finished)

 
Post new topic   Reply to topic    ShortScale Forum Index -> Guitar Projects and Tech/Set-up
View previous topic :: View next topic  
Author Message
astro
.
.


Joined: 14 Jan 2008
Posts: 1716
Location: Montreal

PostPosted: Tue Feb 12, 2019 6:50 pm    Post subject: Another musicmaster bass build (now finished) Reply with quote

Ten years ago I converted a Squier Bronco Bass into a musicmaster



It was a fun bass but I got bored of it and sold it. I've kind of regretted that since then.

A couple of months ago I bought this on a whim:



I initially thought I would build another mustang bass but then I bought this on Reverb:



It's a Squier musicmaster bass body (Vista series). I just bought it yesterday and it's currently in the mail on it's way to me.

Should be a fairly straightforward partscaster, I just don't know what to use for a bridge. I remember that years ago, you could buy the 4 saddle string-through-body Squier musicmaster bass bridges pretty easily, several parts dealers had them for sale. Now it seems that the supply has dried up and nobody has them anymore. A bronco bass bridge would most likely fit, looks like the screw holes are the same, but then I would lose the string through capability and have only 2 saddles. I could probably put a Mustang bass bridge on it, but that might look weird. The problem is that all of these options are hard to find online. Even traditional mustang bass bridges seem to be impossible to find online. My first pick would of course be the Squier Vista bridge, but it looks like the Bronco bass bridge will be the easiset to source. Maybe I could drill it for string-through.

Pickup will be a Lace Sensor Red that I have in my parts bin. I hated it as a guitar pickup but loved it as a bass pickup when I used it in the Bronco. Pickguard still needs to be bought, thinking of mint green.


Last edited by astro on Sun May 05, 2019 12:05 am; edited 1 time in total
Back to top
View user's profile Send private message
astro
.
.


Joined: 14 Jan 2008
Posts: 1716
Location: Montreal

PostPosted: Mon Feb 25, 2019 3:03 am    Post subject: Reply with quote

Body seems to be held up by customs for some reason. They've had it for 10 days, no idea why. Hopefully it will get here soon!

In the mean time, I found a Schaller bass bridge in my parts bin. It looks like this:



I think it would look fugly on the musicmaster bass, but on the bright side I can adjust the string spacing to the narrower width that the stock bridge would have, and it won't cost me anything since I already own it.

I am hesitant due to the fugly factor, but since my searches on the interweb for a musicmaster/mustang/bronco bass bridge have turned up nothing, I might not have a choice but to use it. I think any holes I drill in the body for this bridge would be covered by a stock bridge, so I'll keep looking for one.
Back to top
View user's profile Send private message
kingkiller
.
.


Joined: 02 Jun 2017
Posts: 778
Location: Dumbtown, Florida

PostPosted: Mon Feb 25, 2019 6:43 am    Post subject: Reply with quote

Damn customs ruining everything. Excited to see how the project turns out! I’ve wanted to pick up a bronco bass and do the blade humbucker mod that everyone does but I haven’t had the freedom to yet. I have to free up some space in my workspace first
_________________
Al_ wrote:
I prefer to squeeze balls.


robroe wrote:
You silly fucks


westtexasred wrote:
stay classy robroe
Back to top
View user's profile Send private message
astro
.
.


Joined: 14 Jan 2008
Posts: 1716
Location: Montreal

PostPosted: Tue Feb 26, 2019 11:47 pm    Post subject: Reply with quote

Finally got the body today!

There's a tiny chip in the paint, which I already knew about since the seller had disclosed it. The interesting thing is, you can see that under the blue/green there is a layer of pink, then a layer of white primer. So I guess this was a body that was re-sprayed in the factory?

The bad news: the Squier Mustang Bass neck I bought is about 1mm too wide at the heel to fit the neck pocket on the body. I suppose I'm going to have to sand the neck pocket to widen it, but I'm not sure how to do this while ensuring that the neck won't be misaligned/crooked when installed. Anybody have any suggestions/ideas so that I don't fuck this up? Should I instead be sanding the neck?
Back to top
View user's profile Send private message
astro
.
.


Joined: 14 Jan 2008
Posts: 1716
Location: Montreal

PostPosted: Tue Mar 05, 2019 7:08 pm    Post subject: Reply with quote

So I enlarged the neck pocket on the body with a wood file and my dremel. Now the neck fits nice and tight in the pocket.

However, I chipped the paint around the neck pocket with the file:



Thankfully I found most of the chips and glued them back in place:



Thankfully the bolt holes on the neck line up with those on the body so I won't have to redrill those.

Still no luck finding a suitable bridge, I've decided not to use the fugly one I already have.
Back to top
View user's profile Send private message
kingkiller
.
.


Joined: 02 Jun 2017
Posts: 778
Location: Dumbtown, Florida

PostPosted: Tue Mar 05, 2019 8:39 pm    Post subject: Reply with quote

GFS have a lot of decent looking bridges, but I assume they'll be too big for the bridge spacing on that body
_________________
Al_ wrote:
I prefer to squeeze balls.


robroe wrote:
You silly fucks


westtexasred wrote:
stay classy robroe
Back to top
View user's profile Send private message
astro
.
.


Joined: 14 Jan 2008
Posts: 1716
Location: Montreal

PostPosted: Tue Mar 05, 2019 11:02 pm    Post subject: Reply with quote

kingkiller wrote:
GFS have a lot of decent looking bridges, but I assume they'll be too big for the bridge spacing on that body


You’re right, fender shortscale basses have a narrower string spacing than the long scale models. I can’t remember the exact measurement but that’s why I can only use a bridge made for a shorty.

Bronco bass bridge is cheap ($9 at some websites) but everybody is out of stock at the moment. I saw some Mustang bass bridges on eBay but the sellers want $200 for them... no way I’m paying that much for a bridge!
Back to top
View user's profile Send private message
brainfur
.
.


Joined: 01 Jun 2011
Posts: 1874
Location: United States

PostPosted: Wed Mar 06, 2019 1:56 pm    Post subject: Reply with quote

astro wrote:
kingkiller wrote:
GFS have a lot of decent looking bridges, but I assume they'll be too big for the bridge spacing on that body


You’re right, fender shortscale basses have a narrower string spacing than the long scale models. I can’t remember the exact measurement but that’s why I can only use a bridge made for a shorty.

Bronco bass bridge is cheap ($9 at some websites) but everybody is out of stock at the moment. I saw some Mustang bass bridges on eBay but the sellers want $200 for them... no way I’m paying that much for a bridge!


$12 on reverb!
_________________
George wrote:
in the future there must be only guitars or only computers

theshadowofseattle wrote:
TYPICAL AMERICAN BAND LIKE JAY Z, AXE BODY SPRAY, AND THE VENTURES.
Back to top
View user's profile Send private message
astro
.
.


Joined: 14 Jan 2008
Posts: 1716
Location: Montreal

PostPosted: Sat May 04, 2019 7:07 pm    Post subject: Reply with quote

So I gave up trying to find a bridge from a bronco/musicmaster/musrtang bass, and ended up using the fugly bridge that I already have. Got a mint pickguard, wired up a lace sensor red I had in my parts bin with 500k pots and a 47 capacitor, and it's done:

Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    ShortScale Forum Index -> Guitar Projects and Tech/Set-up All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2001, 2002 phpBB Group

Anti Bot Question MOD - phpBB MOD against Spam Bots
Blocked registrations / posts: 631057 / 0

Guitars at Musician's Friend

Help support this site by clicking the above link!