Guitarbuild for the body, Allaprts for a chunky profile neck, hardware of choice...

Wilkinson Tele neck pickup with the cover removed works for me...cheap as chips too....

Short answer is yes! I used Wilkinson saddles on my Bullet Mustang, and my custom build using a Bullet Mustang neck, no issues at all and the thread size is M3 so it would be easy to sort your intonation screw length problem too...

What I did was buy three Wiliknson Tele compensated brass saddles, then bought longer M3 screws......not the cheapest solution, but you get nice brass saddles too!......

What I did was buy three Wiliknson Tele compensated brass saddles, then bought longer M3 screws......not the cheapest solution, but you get nice brass saddles too!......

onefiftythree wrote:looks awesome!

what kind of paint did you use?

Thanks!

Rattle can Cellulose, which I buy from our local Auto paint supplier, really good quality, good paint to solvent ratio...no grain filler, no primer...

Very nice mods, I used the same (but modded) bridge on my build...

Thanks for the comploments folks, it is my best build yet......well pleased... I like that a lot. I'm half expecting to get a kit guitar for Christmas and I'm thinking about a bright orange or pink stain and tru oil finish. This has somewhat whet my appetite for it. The bare Swamp Ash on this body r...

Pickups were liberated from my other Bullet Mustang which now looks like this......which needs a clean! http://i.imgur.com/GtKdayT.jpg I have spare White Tort scratchplate so might mod it to take the bridge humbucker with a neck single coil like the Cobain model......I have a Duncan JB........not su...

Wired the thing up, rear switch selects pickups, front switch does nothing, paint is now finished, cut back and polished, pickups are Bare Knuckle Sinner at the bridge and a Creamery Strat size P90 at the neck, 250k solid shaft pots, .047cap, treble bleed, Jazz Bass knobs. The paint went straight on...

The body arrived and all the parts were fitted before painting http://i.imgur.com/ZWIyQ5h.jpg Then paint was applied... Cheeky mockup after a coule of coats, note the bridge has been converted to 3 saddles, the original intonation screw holes are now the string retainers... http://i.imgur.com/ieIR7B...

Recently picked up a used Squier Bullet Mustang neck, in my opinion they can be quite nice necks, but the decal lets it down, so as in my previous Mustang modding I sanded the decal off to get replaced as before, however, once sanded I decided to paint the headstock in the same colour as intended fo...

What bridge is this please, Im getting parts together for a hardtail Mustang build and want to use one of these bridges but have no idea what search term to use...

Thanks!

Saw the Bullet Mustang and just had to have one, in Blue......with a view to modding. It arrived with rusty strings and scratchy frets, so first job was afret polish, 11's and a good setup. Out of the box, not a bad little guitar, bridge pickup, not too bad, neck a bit muddy, so, what to do.... My f...

Thanks!

[quote="Mr_Martin"]Today i received the Squier decal and matched my headstock with the body color:



May I ask where you got the new headstock decal?

Cheers!

Well, I'm thinking Tele half bridge, which is about 1.5mm wider string spacing and the footprint should cover the existing holes, I have a Duncan JB and Jazz that I might use but I also have a Creamery (UK pickup maker) Strat size neck P90, at the moment I'm leaning towards a bucker at the bridge an...

Could someone with one of the new Bullet Mustangs measure the distance E to e at the bridge please, I have one on the mail and would like to sort a replacement bridge....

Many thanks!

Hi Folks, I've tried a search….. Can anyone tell me please what woods have been used on the body of the Squier Bronco Basses please, have they all been Agathis? Ive been offered one on another forum, but I once got stung with a plywood EB-0 bass because I failed to research (the ply EB-0 didn't so...

Subscribed

Good start

Decoupage sounds interesting........