I got the body form Robert Origami.
Anyway, I took some pixors, sold Sublimedo a pedal and ordered some new parts.
Here it is with the parts plopped in the body-
SO theres the trick of lining up the neck mounting holes. What I did first is measeure the distance form the heel of the neck to the bottom screwhole.
Then I measured that distance from the bottom of the cavity in thebody.
Then all I did was line up the neck plate in the cavity, mark it and drill!
I sanded it down and started clear coating. This product is supposed to "seal and protect" so I didnt use any grain filler or sealer or anything. It's kind of supposed to be a 70's looking thing. Does not look like this:
Looks more like this:
Coats are drying out in like 45 minutes, so I sand em down real quick and put another coat on and it gets a little smoother every time. Things are looking good for Mr Master, I ordered an avri trem and mustang bridge and a buzz stop, too. Fuck off buzz stop haters. I HIT THE GUITAR HARDER THAN YOU SO YEAH, ITS PRETTY IMPORTANT TO HAVE A BUZZ STOP.