One of those weeks

[NickS]

I dragged my HH VS bass combo out of the garage and found it was slightly buzzy. No, not a wasp nest. I dragged the vintage HH speaker out and it got worse. Apparently leaving them in a damp place for a while can result in corrosion in the voice coil gap, so it's game over; a shame given that apparently they were very sensitive for their day; I've seen a figure of 101 dB (presumably 1W, 1m). Nobody seems to have the Thiele-Small parameters for this speaker so I thought I'd try to establish the free-air resonance frequency and maybe the Q.

20191211_154849.jpg (2.77 MiB) Viewed 157 times

Of course my old oscillator needs two PP3 batteries. I have some rechargeables. Turns out only one of the 3 is any good. Maybe I could do something with this old multi-rail power supply (Android wants that to be a multi-racial power supply). 5 minutes later...

20191211_154823.jpg (2.06 MiB) Viewed 157 times

That's the input filter cap on the PSU, that was.. I might take a break from this after fixing the PSU.

[NickS]

Well, I settled for one of those reasonably-priced QTX bass speakers from whybuynew (though it is new, apparently).

HH_Bass_speaker_installed.jpg (295.61 KiB) Viewed 156 times

I notice it does seem to have taken a slight whack at some point, but I'm hoping that it won't affect anything.

HH_Bass_speaker_dent.jpg (560.3 KiB) Viewed 156 times

I've also replaced the cracked and broken plastic and steel handles with reasonably-priced all-steel steel handles from Blue Aran

HH_Bass_Handle.jpg (259.75 KiB) Viewed 156 times

This is where one of the original wheels tore out.. not quite sure how to address that.

HH_Bass_Damage1.jpg (410.27 KiB) Viewed 156 times

This is where the replacement tore out....

HH_Bass_Damage2.jpg (250.11 KiB) Viewed 156 times

Edit: Rehosted pics.